This document page provides a guide on uploading images to the Datarock Platform, including warnings and errors that may occur during the uploading process. The follow steps are covered:
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Step 1 & 2 - Navigate to upload page
Open Drill holes view by selecting your project (yellow)
Select Upload dropdown and click Upload Image (red)
...
Step 3 - Upload Images
Multiple holes can be added at once however to best handle any potential errors, it’s easier to upload and address one hole at a time.
...
3.2 Drag 'n' drop your images into the red box zone or click text box to navigate to your images on your server
...
Step 4 - Process Images
Imagery QA - Warnings
4.1 Warnings are highlighted on the platform as yellow but do not stop you from uploading the images as they are. This example shows a yellow warning and a blue/green Process Images button to proceed with the upload once warnings have been reviewed.
...
4.3 Errors are highlighted on the platform as red and stop you from uploading the images. This example shows the Upload & Process Images button as greyed out as you cannot proceed until errors have been fixed.
...
4.4 Common errors are due to the naming convention required for Datarock Platform recognition: HOLEID_Tray#_FromDepth_ToDepth.jpg. If this convention is not followed, or missing sections, an error will appear that must be corrected before Uploading is allowed. Files must also be in JPG format.
Datarock naming convention | Example |
|---|---|
HOLEID_ Tray#_ FromDepth_ ToDepth.jpg | MSDP04_1_1.00_5.00.jpg |
HOLEID_ | MSDP04 |
Tray number_ | Starting at 1, increasing by 1. |
FromDepth_ | 1.00 |
ToDepth | 5.00 |